walnut

Another piece of amazing spalted Dogwood. This bowl is 4.125" w x 3.125" h. It has a Walnut base with a Swarovski crystal. You can see more detail shots on my site...

6 1/2" dia. x 6" t - This is one of those pieces that put up a fight - jumping off the chuck and rolling around the garage, requiring a re-shaping. I'm interested to hear feedback on this if anyone's interested. Thickness goes from around 1/16" to about 5/16 towards the inside...

When roughout developed a serious crack over time, I used thin CA on the rest of the stabilized crack with the intent of seeing how thin a bowl I could turn. Band and small foot are woodburned. Bush Oil buffed before and after the finish - with no wax. 6 1/2"w x 4"h. I welcome your...

sycamore, walnut, big leaf maple, largest 10-7/8d x 8, smallest 5d x 5-3/16

This piece is about 8" tall and about 5" at the widest

Walnut with titanium finished accents. Approx. 9" in diameter.

Part of a series using a gold leaf technique to create an antiqued finish.

Side view of fluted Black Walnut Vase to reveal grain pattern.

Black Walnut rough turned green, seasoned, finish turned, fluted and finished with sanding sealer between 180 - 400 grit, 3 coats of Waterlox and buffed with Beall system. Grain was quite unique for the piece. 7" dia x 6" high.

6-3/4 x 3-1/2 Walnut Lacquer

Well its big for me ... 14 1/2" wide by 9 1/2" tall. I had the day off today so I got to play in the shop all day. I originally wanted to turn this into a hollow form but there were two knots on the top that were full of cracks so I decided to make it a bowl instead. Overall I am...

About 12" x 6" and has an antique oil finish. All comments appreciated.

A simple little Walnut bowl about 6 inches in diameter, sanded to 1200 grit, finished with BLO and CA, polished and buffed with white diamond and carnauba wax. Comments/Critiques always welcome, Shane

Walnut and Cherry coffee pot approxs. 10" x 4"

Just wanted to show the figured sapwood in this piece.

8" tall, 10-1/2" wide... antique oil finish... ebonized Walnut collar.

Yellowheart & Mokore Finish: 2 coats Watco Danish Oil Mirror Coat Epoxy (2 coats) then sanded to 1200.

Another view of the mug.

I used a stave design for the mug, finished in Watco Danish oil with Medium Walnut stain. Buffed using Hut.

14.5"x.75", Black Walnut, Maple The platter was turned and the handles were carved from maple and walnut laminated stock then inserted. I retained the rectangular handles shape to contrast with the round platter but I'm not sure if it was the right choice. It may have been better to...