cherry

About 6 inches high and seven inches across. This was from cherry that was air dried for 15 years in a hot shed. The color is really nice. Finished with shine juice.

A twist on classic turning and carving forms. Cherry, 2 1/2" x 2 1/2" x 9 1/2".

Cherry hollow form is carved to three petals. Originally tried Waterlox which did not work well so started over with Watco

These cherry burl goblets, roughly 7" tall, have cocobolo stems with bocote bases, displayed on a walnut tray

I've been turning about 25 years (taught by a boyfriend [they have their uses]), but really immersed myself in it (and shavings) with retirement 1.5 years ago. Girls weren't allowed in shop in HS, so there are some gaps in my knowledge. I turn lamps, pepper grinders, bowls, lidded boxes, and...

My neighbor is cutting several trees at the back of his lot. One is some type of cherry which I'm going to pick up a few pieces- love to turn cherry. The other has a real light wood which he said was hackberry. Worth drying and turning? Thanks.

Finally got around to turning something besides pens and bee hives. This is cherry that was cut about 5 or 6 years ago. Got some tool marks inside and outside as I jockeyed back and forth between centers and the chuck. Figured out how to part it without the piece flying into the Netherworld. A...

I was working to turn a goblet or something to take to my chapter meeting. I noticed what was either a hairline crack or dark grain in a piece of cherry. I started turning and realized I didn't have my face shield on. In one minute or less, it was a crack and a piece about the size of a quarter...

Wasn't in the mood to turn yesterday but set up the grinder and the Wolverine setup. Went through all my tools and sharpened them. Today I did some turning for practice. Makes a big difference! I turned some small tree limbs and some square pieces with the roughing gouge. I decided to try the...

Left to right: American Black Walnut, Spalted Maple and Cherry

Cherry with greek key burned into the rim. 12" diameter

Cherry Wood Live Edge Bowl, 7 1/2" x 6"

Frustrated, to say the least. Started with a piece of cherry to make a lidded box which became a design modification ending up as a practice piece. I have the Wolverine system and Vari-Grind and Rikon grinder. I tried to grind a Benjamin's Best bowl gouge to an Irish grind; off a video. Worked...

Navajo legend says that a deity carries the sun across the sky on his back and then hangs it on a peg to cool off. After it is no longer glowing he carries it back east during the night. I apologize for the bad iPad picture. Hopefully, I will have a chance to get a better picture before it is...

I'm playing around with a piece of cherry about 2 inches in diameter, 5 inches long in a SuperNova2 chuck. I'm turning end grain with a 3/8" Benjamin's Best bowl gouge. I have the tool rest set at 90 degrees to the bed. When I start the cut, outside to inside, I hear/feel vibration. I...

Group shot of ebonized cherry pieces.

Offset detail on ebonized cherry stool. 11" seat x 18" high. Through wedged tenons and brass cross pins.

Anyone know how to permanently delete my old posts?

Our turning chapter had a Turn-&-Learn session with mentors and newbies like me. Learned a lot and need to get turning! Anyway......a member had several pieces of cherry he was giving away. I got three pieces and put them in my van. I forgot about them (senior moment?) and got them out...

A group of boxes I made for my wife and children. The front and right ones were inspired by the vision of a U.S. sailor wearing a "Dixie Cup" hat and dungarees. The left one is my first attempt at a sphere box and the back my first attempt at a deep box. They vary in size from...