Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
Congratulations to Jim Hills for "Journey II" being selected as Turning of the Week for May 6th, 2024
(click here for details)
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Crushgrind hardware or? I was looking at buying the required forstner bits to try my hand at those. Did you find they were all necessary? (15/16, 1-1/16, 1-9/16, 1-3/4")
The 1-1/16 is the most needed for the crush grind, the others are not that important to be exactly those sizes. the shallow recess at the bottom is about 1-5/8 but you can turn that one. a 1" would probably work as the grind part is only about 2" in length and that would be easy to enlarge if needed.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.