After looking and searching about carbide scrapers before I take a decision I’d like to know your experience and advices (i would like to work small products like candle holders, tool handles, small boxes)
SIMPLE WOODTURNING TOOLS USA made, each gouge around $60 the set of tree $ 170 (square shaft).
https://www.amazon.com/Woodturning-...ab-9004-a2b9761e9fa7&pd_rd_i=B00IPPET68&psc=1
WOOD PECKERS ultra shear, each one between $100 and $129, it’s supposed to have nano tech in the cutter(clean cut) and the feature that you can rotate the shaft either direction in the fly and get a 45° degree flat side for shear.
Just one concern don’t know if I’m right but I see that the shaft has a triangle shape which could be uncomfortable?.
https://www.amazon.com/Woodpeckers-...a1-b674-2f287df48b5a&pd_rd_i=B077H2S3F4&psc=1
ROBERT SORBY turn master, it uses one adapter that holds all type of RS cutters and it’s attached to the shaft.
You can get more adapters separately for each cutter and for easy change it also has the feature that rotates the cuter in the adaptors and get a 45° degree for shear scraping (you need to unscrew the adapter and change position)
I was about to for this option because the versatility and there was a set with one handle and 3 cutter for $104.
But then I read just one review that complains about the adapter that doesn’t let to be close to the work piece because it’s wider than the shaft (it make me sense)
Then I was about to go for the Simple woodturning tools but the shaft is square then I need to buy an extra gouge that has a round shaft for shear scraping.
I’m new in woodturning and I don’t know the value of that features if there’s a really better carbide technology
Please I’d like to hear from your experience and recommendations
Thank you in advance
SIMPLE WOODTURNING TOOLS USA made, each gouge around $60 the set of tree $ 170 (square shaft).
https://www.amazon.com/Woodturning-...ab-9004-a2b9761e9fa7&pd_rd_i=B00IPPET68&psc=1
WOOD PECKERS ultra shear, each one between $100 and $129, it’s supposed to have nano tech in the cutter(clean cut) and the feature that you can rotate the shaft either direction in the fly and get a 45° degree flat side for shear.
Just one concern don’t know if I’m right but I see that the shaft has a triangle shape which could be uncomfortable?.
https://www.amazon.com/Woodpeckers-...a1-b674-2f287df48b5a&pd_rd_i=B077H2S3F4&psc=1
ROBERT SORBY turn master, it uses one adapter that holds all type of RS cutters and it’s attached to the shaft.
You can get more adapters separately for each cutter and for easy change it also has the feature that rotates the cuter in the adaptors and get a 45° degree for shear scraping (you need to unscrew the adapter and change position)
I was about to for this option because the versatility and there was a set with one handle and 3 cutter for $104.
Sorby TurnMaster w/Handle & TCC Detail Point Cutter | Hartville Hardware
The handled version of the Robert Sorby TurnMaster Tool with a tungsten carbide Detail Point cutter.
www.hartvillehardware.com
Then I was about to go for the Simple woodturning tools but the shaft is square then I need to buy an extra gouge that has a round shaft for shear scraping.
I’m new in woodturning and I don’t know the value of that features if there’s a really better carbide technology
Please I’d like to hear from your experience and recommendations
Thank you in advance