I have never turned on a wood lathe. Just retired and am interested in learning a new hobby! Just received my WEN starter 12x18 lathe, set up in the garage.
-
March 2025 Turning Challenge: Identical Bowls or Plates! (click here for details) -
Congratulations to Michael Nathal for "Ash Ring" being selected as Turning of the Week for March 17, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Bill Thompson
- Thread starter Bill Thompson
- Start date
Hey Bill! There are lots of turners and some clubs near you where many are willing to help you get started!
If you want to schedule a visit over towards Knoxville, I'd be glad to give an introduction lesson and send you home with some wood to play with!
(Warning, I always start students with the skew chisel, then move to the spindle gouge, then the spindle roughing gouge, then parting tool, etc... Good fun.
(I do this because I love it. My fee for lessons is a good story or a good joke.)
These two girls (one I knew from my kindergarten class) came for a one-day accelerated lesson. Spindles in the morning, bowls in the afternoon. They made things to take home.
One is now a dedicated woodturner! (the other is busy working on her PHD in pathology)
I've had lots of other students since. Here are a few of the guys:
JKJ
If you want to schedule a visit over towards Knoxville, I'd be glad to give an introduction lesson and send you home with some wood to play with!
(Warning, I always start students with the skew chisel, then move to the spindle gouge, then the spindle roughing gouge, then parting tool, etc... Good fun.
(I do this because I love it. My fee for lessons is a good story or a good joke.)
These two girls (one I knew from my kindergarten class) came for a one-day accelerated lesson. Spindles in the morning, bowls in the afternoon. They made things to take home.
One is now a dedicated woodturner! (the other is busy working on her PHD in pathology)
I've had lots of other students since. Here are a few of the guys:
JKJ
John,
Thank you for the kind offer. I have found a local club here in the Clarksville area. Will be attending my first turning class give by the club on the 4th Saturday of every month. If I'm headed to Knoxville anytime soon I'll look you up.
Thanks again
Bill
Thank you for the kind offer. I have found a local club here in the Clarksville area. Will be attending my first turning class give by the club on the 4th Saturday of every month. If I'm headed to Knoxville anytime soon I'll look you up.
Thanks again
Bill
Welcome, Bill. If you fancy a drive to Columbia, I can give you some wood to practice on. It's a little closer than John's place. 
Kent, that would be great. Direct message sent with contact info.Welcome, Bill. If you fancy a drive to Columbia, I can give you some wood to practice on. It's a little closer than John's place.
Thanks Bill
Well here it is. My first ever project turned on my new lathe. Just did what felt right. Will attend my first class on Saturday.
Thanks Bill
Thanks Bill