• November Turning Challenge: Puahala Calabash! (click here for details)
  • Sign up for the AAW Forum Pre-Holiday Swap by Monday, November 4th (click here for details)
  • Congratulations to Ted Pelfrey for "Forest Floor" being selected as Turning of the Week for November 4, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

grinder

  1. George Pagliarulo

    Best practices for eliminating wobble and dressing a wheel.

    When eliminating wobble on a two wheel grinder, does it matter if both wheels are mounted. Should you eliminatet the wobble on one and then mount the other? It seems they should be independent but just checking. Same question for dressing one of the wheels. For wobble, what is considered...
  2. Kent Crowell

    WTB speed grinder for class

    WTB Jet 8 in. Wood Working Bench Grinder with Norton Wheels or similar with a jig and maybe CBN wheels for a YWCA youth and adult classes held in Lubbock Texas. See our classes at https://www.southplainswoodturners.org/youth-education.html kcrowell56@gmail.com
  3. Jim McLain

    Grinder Stones Norton 3x 8 inch with accessories

    Three new unused Norton 3x grinding stones. All are 8 inch by 1 inch. Two are 80 grit and one is 46 grit. Included with wheels are two precision adapters 1 inch by 5/8. Will also include two stone dressers. Total retail is well over $200. Will sell for $120.00 shipped to your door. Open...
  4. J

    Sharpening Method

    I want to devote one of my belt sanders for sharpening my tools and build a jig for it. My question is if I use my Harbor Freight 4X36 Belt Sander, what would be the best grit to use assuming only one grit would be sufficient. I've been using a homemade 2X48 Belt Sander but 2" is too narrow for...
  5. Brad Winesett

    Sharpening supplies and jigs

    Prices below do not include shipping. I don't mind shipping UPS, Fedex, or USPS. Whatever you like best and I'll just charge exactly what it costs me. Tormek SVS-50 Multi-jig - SOLD! General Tools #809 Chisel/Plane blade guide $8.00...
  6. John Torchick

    Grinder wheels?

    I have a Rikon grinder with the standard wheels. Might have some extra $$$$ later this year and need some input on the CBN wheels. Appreciate your experience and recommendations.
  7. A

    ONEWAY Balancing System

    5/8” Precision Balancing System for grinding wheels with a 1” thru hole Brand New in the box-never used list price frame ONEWAY $69.95 Asking $30 plus Shipping This is the new style I’m still using the old one
  8. Glynn Cox

    8" CBN grinding wheel

    SOLD For sale is one high quality 8" 180 grit CBN wheel made by Optigrind in Austria. This wheel is steel, not aluminum or plastic like many of the others offered. The wheel has been lightly used and features a 1.5" width with CBN on one side. The wheel has a 1" bore and includes a 5/8" ID...
  9. John Torchick

    Something from the Mrs.

    I finally decided to put my Rikon grinder on the shelf under my lathe. Being concerned about the dust and shavings, I approached my wife about this dilemma. She does a lot of sewing and came up with this. It is a heavy fabric similar to Cordura and has a vinyl lining. She took the...
  10. John Torchick

    Grinder setup on lift system

    I saw a nice setup for the low speed grinder yesterday and forgot to bookmark it or note it. It was a video of a lady who built a wood lathe stand with some drawers and a compartment for the grinder. The grinder was mounted on a lift system that allowed it to be brought out and up to sharpen...
  11. J

    homemade grinder tool rest setup jig question

    I have a OneWay clone jig on my slow speed grinder. I have seen several comercial setup blocks for getting the tool rest to a specific angle. I have also seem pictures of jigs made from plywood. I would like to keep cost down by cutting a jig out of 1/4 inch plywood to set the correct angle...
  12. John Torchick

    Sharpening problem

    I have a set of HF beginner's HSS tools, Rikon low speed grinder, and the Wolverine sharpening jig. My grandson and I were working on a mini baseball bat for his older cousin. While sharpening the 3/4 inch roughing gouge, I held it up to the light and I noticed that one side of the grind was...
  13. John Torchick

    Polishing your turnings

    OK, I just finished a bee hive of an unknown wood, applied two coats of satin WOP. Looks decent but, to me, not good. This is only my second real turning but realize that I have a lot more to learn. What would be the result of polishing satin WOP? I know many use a gloss finish and polish...
  14. R

    Grinder Trouble

    First, my apologies if this has been covered earlier; I've looked and can't find the answer to my question. Is there a problem using a 1/2 horse (5.0 amp) grinder with two CBN wheels? My grinder (a Craftsman, variable speed, 8", with 5/8" arbors) is less than a year old. It really groans when...
  15. J

    Grinder height?

    Hello all, I'm just getting in to turning, and my bench grinder / sharpening station needs some serious rehab. Right now it's a 6" grinder on a B&D Workmate... It's way too low for long term use, and the workmate is nearing the end of days, so it's time for a new base. The big question...
  16. W

    Bench Grinder Selection Help Needed

    I need a new grinder for the Lathe Studio. Want the best I can afford, 8" should be large enough I think, but I was wondering about who makes the best grinder for lathe tool sharpening? I was hoping to find a 2 speed or a variable speed one so that sharpening can be done at a slower pace...
  17. C

    How to Change Wheels on Baldor Grinder??

    I have a Baldor 602E grinder and am ready to change wheels from the original 36-grit and wire brush to a set of Norton aluminum oxide. Baldor doesn't seem to make it easy, though. To remove the wire brush on the right I wedged the 36-grit wheel on the left and used a crescent wrench to loosen...
  18. strata-bond pepper mill

    strata-bond pepper mill

    10" mechanism, Strata-bond rolling pin blank from Craft Supplies.
  19. spalted sycamore

    spalted sycamore

    Another design by my daughter. Turned by me for her for a gift to one of her chef instructors.
  20. pepper_pair

    pepper_pair

Back
Top