Powermatic sent me a new VFD model to replace my old one. So far they have not come up with a wiring diagram that works! The old S1 is no longer made. Any engineers out there with this experience? I am beyond frustrated with PWR!
-
Beware of Counterfeit Woodturning Tools (click here for details) -
Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details) -
Congratulations to William Rogers for "Ambrosia Maple Platter" being selected as Turning of the Week for September 16, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Wiring new inverter VFD?
- Thread starter Dick Torkildson
- Start date
First PM should have provided a manual with all connections needed. If you would like take the brand name and model number off of the new VFD and post it here then I can look up the manual and tell you what the connections should be.
Don, thanks so much. The new VFD is a Delta Electronics D015E21A. I have a Powermatic 2020 4 1/2 years old. Luckily they replaced it at no cost but it took them 2 1/2 months! No manual provided and I have tried 3 wiring schematics provided by them, all to no avail! Unbelievable to say the least. Thanks again.