Forgive me for opening Pandora's box but I've been searching the forum for an hour and still don't know how to proceed. I bought a new skew gouge but it is 1 inch wide and my bench grinder wheel is only 1 inch wide and I'm having a very difficult time sharpening it properly. I couldn't find where Norton sells wheels that are wider. I have the wolverine jig with the skew attachment and it still doesn't work as well as I would like and I'm such a newbie that I stink at free hand sharpening (I ended up leaving multiple facets that had to be ground down later). So my question is do I buy CBN wheels for my grinder since they seem to be wider or spend even more money and get a Tormek to go with my grinder? I otherwise like my Jet slow speed grinder and wolverine system and it works great for my bowl gouges. If you have other suggestions I'm open to them as well. Thanks in advance!