I got a new belt followed the instructions in manual, Said to pull out shaft and it does not pull. Tried leverage between the chrome hand wheel nothing any help would be appreciated.
Ed
Ed
I got a new belt followed the instructions in manual, Said to pull out shaft and it does not pull. Tried leverage between the chrome hand wheel nothing any help would be appreciated.
Ed
Earlier Jet mini lathes only had 1 setscrew in the handwheel. After you replace the belt following Bill's advice I would drill and tap a hole for another set screw. A very common problem with the Jet Mini's is the handwheel coming loose. This introduces slop in the spindle and creates vibration. 2 set screws has solved this problem on all of them I've worked on.