Need some help from anyone willing to share. I have been working very hard with all of my tools. I've gone from blowing up every other bowl to finally getting some complete projects. I have begun to focus on the finished project and seeing the flaws within each piece, wanting to get much better at the details.
Here is where I am struggling. I have gotten much better at the overall finish, but, I still can see slight "lines" in my finished projects. I start with roughing out the bowl or vessel and move to a bowl gouge, and my last tool is a scraper, taking off the slightest bit, to get a final finish. I'm not rushing, trying to "feel" for the ridges, but, I still have some showing up. It has become obvious that I can't sand them out (at least I don't think so, doing the sanding by hand).
Any tips would certainly be appreciated. I can send pictures but I have a feeling many of you have been there and know what I am speaking about.
Thanks in Advance for any help
Here is where I am struggling. I have gotten much better at the overall finish, but, I still can see slight "lines" in my finished projects. I start with roughing out the bowl or vessel and move to a bowl gouge, and my last tool is a scraper, taking off the slightest bit, to get a final finish. I'm not rushing, trying to "feel" for the ridges, but, I still have some showing up. It has become obvious that I can't sand them out (at least I don't think so, doing the sanding by hand).
Any tips would certainly be appreciated. I can send pictures but I have a feeling many of you have been there and know what I am speaking about.
Thanks in Advance for any help