- Joined
- Aug 5, 2008
- Messages
- 4
- Likes
- 0
With a drill (1/4") in a drill chuck mounted in the tail stock, I am having a problem with the drill wobbling causing an oval hole in the work piece.
The drill bit is sharp. Before drilling, the tail stock is extended only 1" which is enough to lock the chuck. The length of drilling into the work piece is from 1" to 2".
Any help would be appreciated.
The drill bit is sharp. Before drilling, the tail stock is extended only 1" which is enough to lock the chuck. The length of drilling into the work piece is from 1" to 2".
Any help would be appreciated.