Years ago I found plans and built a carving stand utilizing a reverse chucking adapter and pipe whereby you affix the work via the chuck to the stand at a bench. I no longer have the device and would like to make another. Anyone familiar with the plans?
-
April 2025 Turning Challenge: Turn an Egg! (click here for details) -
Congratulations to Kelly Shaw winner of the March 2025 Turning Challenge (click here for details) -
Congratulations to Ellen Starr for "Lotus Temple" being selected as Turning of the Week for 21 April, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
DIY Carving Stand
- Thread starter Michael Cunningham
- Start date
john lucas
AAW Forum Expert
You can get reverse chuck adaptors from Oneway and from Bestwoodtools. The one from Oneway has a 3/4x 19 tpi internal thread. The one from Bestwoodtools has a #2 'morse taper. You can also find 1" x8 threaded adaptors with 5/8" bored hole online. Do a Google search for 1" external to 5/8" internal threaded adaptor. I have not looked in my searches but Oneway may sell other external pitches with the 3/4" internal.
John, I know. I'm looking for those long-ago plans (or newer) for the stand. The reverse chuck adapter is 1 1/4" - MT2 and I have it.
Last edited:
I saw one of these designed by Carl Ford posted on instagram several months ago and thought about making one: https://carlford.us/blog/2021/12/carls-carving-stand/. When I was looking for that I came plans for this one: http://woodarchivist.com/4004-wood-carving-vise-plans/. Would either of those be a suitable starting point?
Adam
Adam
Exactly what I was looking for and #2 is the same I had built. Thank you!