A friend just returned from a Montana hunting trip and was thoughtful enough to bring me a couple cottonwood and aspen logs for turning. These species are not available in NC where I live and I am just wondering what to expect. Anybody here ever turned those species?
-
November Turning Challenge: Puahala Calabash! (click here for details) -
Congratulations to James Seyfried for "Cherry and Redheart Ornament" being selected as Turning of the Week for November 18, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Cottonwood and Aspen
- Thread starter Wally Crawford
- Start date
I have been turning a fair amount of cottonwood lately. It turns well. Its not particularly hard, but not particularly soft either. It often has good figure, frequently has natural staining, often has darker heartwood depending on the size. It sands to a pretty good sheen naturally, takes a nice finish.
It does NOT seem to stain well...went down this experimental staining path a few times. I tried it with cottonwood each time, as a treecutter friend had a TON of cottonwood he needed to get rid of (too many wood piles, neighbors complaining), so I've been taking a lot of it. It just does not stain well. It finishes fine with standard finishes, but when it comes to stain the fibers of the wood, even with a pre-stain conditioner, just do not absorb the stain in any way resembling consistent or even. So I wouldn't stain cottonwood.
Aspen is similar, its not a harder wood, its a bit softer. With the aspen I've turned, it doesn't turn as well as the cottonwood. But, it does have this internal staining around the heartwood that is quite nice. Being slightly on the softer side its very easy to turn. I had a tough time getting it to take spar or poly finishes well. Don't know if it was just the particular species or not. IT was very, very dry wood. It took my more standard shellac + acks finish fine, but that's not a particularly durable finish.
I don't think I have any of the aspen pieces around, but here are some of the cottonwood pieces I've turned recently:
I like the cottonwood for its variation and figure. Almost every piece I have has some figure, most has some natural staining. Just makes for more interesting wood, I think. It takes a finish very nicely.
It does NOT seem to stain well...went down this experimental staining path a few times. I tried it with cottonwood each time, as a treecutter friend had a TON of cottonwood he needed to get rid of (too many wood piles, neighbors complaining), so I've been taking a lot of it. It just does not stain well. It finishes fine with standard finishes, but when it comes to stain the fibers of the wood, even with a pre-stain conditioner, just do not absorb the stain in any way resembling consistent or even. So I wouldn't stain cottonwood.
Aspen is similar, its not a harder wood, its a bit softer. With the aspen I've turned, it doesn't turn as well as the cottonwood. But, it does have this internal staining around the heartwood that is quite nice. Being slightly on the softer side its very easy to turn. I had a tough time getting it to take spar or poly finishes well. Don't know if it was just the particular species or not. IT was very, very dry wood. It took my more standard shellac + acks finish fine, but that's not a particularly durable finish.
I don't think I have any of the aspen pieces around, but here are some of the cottonwood pieces I've turned recently:
I like the cottonwood for its variation and figure. Almost every piece I have has some figure, most has some natural staining. Just makes for more interesting wood, I think. It takes a finish very nicely.