• It's time to cast your vote in the January 2025 Turning Challenge. (click here for details)
  • Conversations are now Direct Messages (click here for details)
  • Congratulations to Alan Weinberg for "Elm Burl Bowl" being selected as Turning of the Week for January 27, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Compressor and pneumatic sander?

odie said:
... I believe it was Bill Boehme who had a bad experience when his compressor sprung a leak while he was away from home.....and, it ran continuously while he was away.....
Click to expand...

I believe that you have a good memory. :) The hose developed an aneurysm which stayed about the same size for a couple months. I don't know why it didn't occur to me that one of these days it might enlarge and blow out while I wasn't in the shop. Anyway, that's what it did and it probably ran continuously for a day or longer. When I walked in the shop there was so much smoke that I couldn't see across the room. The compressor pump was almost hot enough to glow red and was still giving off lots of heat several hours later and making those plinking sounds that you hear from a woodburning stove. I imagine that the cylinder walls are glazed with burned oil. That was quite a few years ago and the compressor is still running as if nothing happened.
 
Well gents, many thanks for your kind attention and help during my crisis. I decided that, on balance, what I really needed was to find a better way to sand that didn't include air and a quieter compressor. So I although I will continue to covet that 15 hp Quincy scroll compressor, I have found one that will work for me. Photo below...

I think I really got my priorities right with this one. Portable and lots of power.

exile trike.jpg
 
Seriously, thanks everyone. All the discussion got me to evaluating what my goal was and truly it is to have a compressor that is quieter and to have better power sanding options. I don't think that a bigger compressor is what I need now and will wait until a build a shop that can include a dedicated space for the compressor. Meanwhile I'm going to look into Olaf's suggestion, and I did order a california Air Tools compressor. 70 db, 6.5 cfm at 90 psi so it'll run a small detail ROS and blow dust off of things (and my son in law gets the hand-me-down.

Thank you all and Merry Christmas eve!
 
Mark Hepburn said:
Seriously, thanks everyone. All the discussion got me to evaluating what my goal was and truly it is to have a compressor that is quieter and to have better power sanding options. I don't think that a bigger compressor is what I need now and will wait until a build a shop that can include a dedicated space for the compressor. Meanwhile I'm going to look into Olaf's suggestion, and I did order a california Air Tools compressor. 70 db, 6.5 cfm at 90 psi so it'll run a small detail ROS and blow dust off of things (and my son in law gets the hand-me-down.

Thank you all and Merry Christmas eve!
Click to expand...

I see you considered my suggestion about less power and more QUIET! ......but, I know, you still want the Big One! ;)
Merry Christmas and a great New Year to you and all others on this forum!
 
Tom Gall said:
I see you considered my suggestion about less power and more QUIET! ......but, I know, you still want the Big One! ;)
Merry Christmas and a great New Year to you and all others on this forum!
Click to expand...

Yes. Yes, I still want the Mac daddy compressor Tom. :D Merry Christmas
 
Mark,
Down here where we live you will get a lot of moisture in your compressor tank. That's why I highly recommend oil and water filters. They are cheap insurance. Unless you are running your compressor 8 hours a day, you don't have to spend the money for an auto-drain, They are nice, but not necessary for a hobbiests. Just add a simple ball valve below the tank and run your drain hose outside through a shop wall, If you put your compressor out on the porch, running the drain line outside is even easier. It takes less than a minute to drain your tank if set up this way.

If you have a porch , putting your compressor outside is the best way to go. Just make sure to keep the rain off it.

I have neither the outside space nor a porch so my compressor is inside. That's why I like my CalAirTools compressor. It is quiet. I leave it on all the time and it only cycles when I am using air. I would buy another CAT compressor in a heartbeat. The other brands mentioned are all good air compressors. It is just that my primary focus was a quiet compressor. If I had a place for a large compressor (outside) and planned to use a lot of air tools, I would purchase a compressor with an 80 gallon tank. I don't so I bought a small one,

Someone mentioned a two-stage pump. They are very nice and generally can support more cfm. Therefore you can get a faster recovery rate than a single stage. Even though this may sound like a cliche, try to figure your maximum use, how far you can stretch your budget, what options you want, and then go shopping.

You are getting good advice from the folks on this site. However, if you would like to chat, let me know I I will send you my mobile phone number via a private message.

Jon
 
You must log in or register to reply here.
Back
Top