lathe

Hi everyone. I’m new to the forum. Recently dragged an old Craftsman lathe out of storage and starting turning. The tip on the live center is broken and I’m looking for new one. It is from Sears Canada, which no longer exists as an entity. I’ve tried Zlive Center, e-replacement parts and Sears...

I finally stepped up to the Laguna Revo 24/36 and have an extra lathe laying about. It's just over a year old and was used for my buffing station for the last 6 months. Nova Comet II runs great. Comes as pictured, I'll even throw in the stand it's on if you are local. $375 as is. Shipping at...

SOLD FOR SALE a super clean Jet JWL-1642EVS2 woodturning lathe. This lathe is 2 horse power 230 volt and is probably the cleanest lightly used lathe you have ever seen. Though the original owner turned pens and used CA for finishing which left parts looking less than original, a good cleaning...

I have a brand new, still in its un-opened shipping box, Lift Lock and Roll lathe mobility system for a PM 3520c. Looks like Craft Supplies no longer has these in stock, though I see Packard still carries them. Including freight surcharge, it cost me $500 to get this to my door. I'm asking $375...

I am replacing tools from a shop fire, and looking for a large lathe, preferably Oneway, or similar and in need of a large band saw for resawing, 16-20". Let me know what you have and where you are. Located in Missouri but will travel.

I finally decided to put my Rikon grinder on the shelf under my lathe. Being concerned about the dust and shavings, I approached my wife about this dilemma. She does a lot of sewing and came up with this. It is a heavy fabric similar to Cordura and has a vinyl lining. She took the...

Greetings! My club has a PM 3520A and it has been somewhat neglected since I've known it as far as maintenance goes. I've been doing some repairs and general work on it this year and I've noticed that the power switch has gotten a bit loose where it it mounted. I have not just dug in and tried...

This listing is for one Oneway Stronghold heavy duty 4 Jaw scroll chuck #2137. The chuck has been used but is in excellent condition. It comes with #2 profiled jaws and a 1"x8 threaded insert. Also included are the chuck key, woodworm screw, Allen wrench and owner's manual. With a massive...

I'm sure this is nothing new to this group but wanted to share this for anyone taking time to clean up the shop. I have spent the last three days cleaning up the shop, organizing items in like function or use, and looking at what needs to be done next. My project this evening was to clean up...

Package Details: For sale a great small lathe, ideal for bowls up to 12" diameter, spindles and pens. I am moving to a city apartment and sadly have to sell. Lathe has a 220V motor with variable speed control. Integrated base with leveling feet keeps the lathe rock steady, even turning the...

I purchased this Serious Lathe new in June 2016 as I was planning to start turning professionally. This has not been feasible, so I no longer need this second lathe. This lathe (view specs here - http://serioustoolworks.com/wood-lathes.php) has a 25" swing, weighs about 1580 lbs, and includes...

My wife just returned from the mailbox with the latest issue of American Woodturner. I thumbed through it and stopped at page 35 due to the schematic picture. I read the article on page 34 by Pat Peckham about a young lady who is confined to a wheelchair. A retiree went to work and came up...

I have this chuck for sale but I have no idea who made it or if it is totally complete. It has several jaws and a 1-1/4x8 thread. If you know anything about it please reply. Make me an offer I can't refuse and it will be yours. I can ship flat rate for $13.60 to US. Glynn

For sale is a Oneway 2436 2 HP lathe in great clean little used condition with a 17" bed extension and 20" outboard turning accessory. All standard accessories provided with the lathe such as face plate, live and drive centers are included. Also included are the following additional items...

Delta wood lathe model 46-715. Works great. Accessories: 4 inch tool rest 6 inch tool rest 12 inch tool rest 2 knockout bars Faceplate Live center Drive center 2 banjos and banjo extenders Faceplate wrench Would like to get $550 or best offer. Call or Text me at: 860-977-2122 Email...

Exciting news! Today, December 1, the AAW has launched AAW EXPLORE! This new resource makes exploring the most extensive online woodturning library in the world, quick and easy. More than 2,500 items currently make up the expanding EXPLORE! collection, including articles from thirty years of...

Hi- New to forum. Just acquired this and the VS sleeve which moves the VS sheave seems to be stuck. Also researching how I am going to power this things. Head is swimming w those that have bypassed the reeves w a VFD, what is best way to take my single phase 220 V incoming to 3 phase to...

Here is a composite of info from a couple of sources: A new Woodcraft store will be located at 5824 Brainerd Road; phone 423-701-8001. :D The location is in or near the Brainerd Village S/C. Wayne Loveless will be the manager- it was noted that he did turning instruction at the previous store...

I got my new Rikon 70-050VS lathe a while back but remodeling has taken a lot of my time. This has interfered with important things like fishing, hunting, turning. I started it up yesterday to rough-turn a grip for a rod I'm building as an auction item for a fundraiser. I was impressed with...

I had received many recommendations for a new lathe but were out of my (read that SWMBO) budget. Our chapter president recommended a Rikon 70-050VS as a great buy- on sale at a Georgia woodturning supplier. It has good reviews and carries a 5 year warranty. Looking forward to receiving it...