This oblong Coolibah Burl was better suited as an elliptical turning than a mill blank so my wife Alison suggested I turn the burl chunk on the Oval Device. Finished with Yorkshire Grit and wax. The overall finished size is 21" X 14" X 3.25" with an elliptical bowl size of 12" X 8" X 1.5" and 3 carved feet. This was turned using the Vicmarc VOD 300 on the outboard side of the lathe. This piece was a bit of a challenge as the VOD manual recommends the total weight of the chuck or faceplate with jigs and the workpiece be under 5kg, the finished piece weighs 5.1 kg