• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Jim Hills for "Journey II" being selected as Turning of the Week for May 6th, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

110 Volt vs. 220 Volt Lathe

Joined
Apr 25, 2004
Messages
2,560
Likes
34
Location
Annandale, New Jersey
Probably would have if they knew they were talking to a lawyer though. :)



The inspector is the judge and areas can make and interpret code differently. But I find that odd as it would really make it difficult and expensive for spas that require two GFCIs. Some have a separate one for the heater.



I was just pulling you chain a little. I apologize if I have offended you.

Perhaps TW waded this am. de nada.

I did a full r&r on our master bath. Had had a Jaq on a timer (just replacing what was there). Replaced with a Kohler "soak tub" that required two GFCI circuits (pump and heater) as well as bonding and secondary ground. Inspector about drove me nuts as he insisted on visually tracing both circuits from panel to tub before he'd let me close up the ceiling. He actually said that code required "the circuit to be GFCI" meaning from panel onward. BSOM, I'm just follerin' orders. :D
 

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,903
Likes
5,194
Location
Dalworthington Gardens, TX
Website
pbase.com
I took a Master Electrician class about forty years ago and the instructor was the chief inspector for Dallas County. He was a really sharp guy and knew the code inside out. He said that the code isn't vague at all, but unfortunately chief inspectors in many rural counties are too often just some jack leg electrician who doesn't know brown stuff from Shinola.

This isn't to say that the NEC is an easy read. It isn't. But it's no worse than the Texas Constitution. :rolleyes: Without the investment in time to thoroughly learn it, it would appear to be open to interpretation. That said, local governments have some flexibility in implementation.
 
Last edited:
Joined
Apr 25, 2004
Messages
2,560
Likes
34
Location
Annandale, New Jersey
Cialis

This isn't to say that the NEC is an easy read. It isn't. But it's no worse than the Texas Constitution. :rolleyes: Without the investment in time to thoroughly learn it, it
would appear to be open to interpretation. That said, local governments have some flexibility in implementation.

Appears that I had a "strict constructionist" for an inspector (based on how HE reads the code, of course) :D

Since Fellini died, I'm still looking for somebody to explain the "2-tubs" situation . . .
 
Back
Top