• January Turning Challenge: Thin-Stemmed Something! (click here for details)
  • Conversations are now Direct Messages (click here for details)
  • Congratulations to Gabriel Hoff for "Spalted Beech Round Bottom Box" being selected as Turning of the Week for January 6, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Where can I find a Wood Tap

John Abt

John Abt

Joined
Mar 7, 2006
Messages
149
Likes
0
Location
Hanover, MD
😕Does anyone know where I can buy a 3/4" x 10 tpi tap so I can make custom centers to put on my Powermatic live center?
 
John - I bought a "oneway revolving center adapter" from either Packard or Craft Supplies that converts the live center to the same size/thread as the spindle.

Click Here To See It At Craft Supplies

You can then buy and use the same Beall Spindle tap on both ends. With this solution you get the added benefit of being able to hang a chuck / faceplate off the live center.


Ed

(P.S. The powermatic live center is identical to the oneway live center.)
 
Last edited:
John Abt said:
😕Does anyone know where I can buy a 3/4" x 10 tpi tap so I can make custom centers to put on my Powermatic live center?
Click to expand...

Hi John! Good to meet you in Richmond!

I bought a 3/4"-10 tap on eBay for about $ 5 and another $3.50 for USPS shipping..... works great for making adapters, etc. for my Oneway live center. I still want to get some of the UHMW plastic stock to make a few cones, etc. for tailstock support. The tap I have was made in Germany and was new in the box when I received it (still had cosmolene on the threads and orginal labelling/seals. You might want to give ebay a try....

Rob Wallace
 
You must log in or register to reply here.
Back
Top