I remember hearing somewhere that I should not turn off my vacuum pump when there is vacuum suction on a bowl - I should bleed the vacuum from the regulator instead and then turn off the pump. Is this the right thing to do, or can I just turn off the pump. Will this harm the pump in any way. Thanks in advance.
-
Congratulations to Alex Bradley winner of the December 2024 Turning Challenge (click here for details) -
Conversations are now Direct Messages (click here for details) -
Congratulations to Gabriel Hoff for "Spalted Beech Round Bottom Box" being selected as Turning of the Week for January 6, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Vacuum pump
- Thread starter holistic
- Start date
a gast technician told me to keep the vacuum pump running for a while after completing work on the lathe.
this allows the pump to dry out and keeps the seals happy.
this allows the pump to dry out and keeps the seals happy.
Andy Hoyt
In Memoriam
- Joined
- Aug 15, 2005
- Messages
- 159
- Likes
- 2
- Location
- Benton Falls, Maine
- Website
- www.downscaledesigns.com
-e- Is that with the valve open or closed?
with my setup, it's with the valve open ...
- Joined
- Nov 25, 2006
- Messages
- 215
- Likes
- 0
Vacuum Pump Primer
I'm lookinf for a good primer on vacuum chucking. Anyone have a reference to one that would help? Set ups, home made rigs, jigs, faceplates, pressures, hazards, etc. We're looking to do a workshop on it at The Bayou Woodturners and would like to include a formal reference it it's available.
Makin' Shavin's
I'm lookinf for a good primer on vacuum chucking. Anyone have a reference to one that would help? Set ups, home made rigs, jigs, faceplates, pressures, hazards, etc. We're looking to do a workshop on it at The Bayou Woodturners and would like to include a formal reference it it's available.
Makin' Shavin's
Vacuum
Eddie,
Look in the How To Section Forum here on AAW. You'll find a very good primer put together by Jeff.
You can also find a very extensive article by Bill Noble on the Glendale WT site
at http://216.92.36.57/tech_tips/frame_1.htm
Good luck
Eddie,
Look in the How To Section Forum here on AAW. You'll find a very good primer put together by Jeff.
You can also find a very extensive article by Bill Noble on the Glendale WT site
at http://216.92.36.57/tech_tips/frame_1.htm
Good luck
might i suggest you check out the 'how-to' forum here:
http://www.woodturner.org/vbforum/showthread.php?t=731
http://www.woodturner.org/vbforum/showthread.php?t=731