• January Turning Challenge: Thin-Stemmed Something! (click here for details)
  • Conversations are now Direct Messages (click here for details)
  • Congratulations to Gabriel Hoff for "Spalted Beech Round Bottom Box" being selected as Turning of the Week for January 6, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Turning tools from allen wrenches

Allen Tools

John Lucas has made quite a few allen wrenches into turning tools. He turns some very small...correction - micro size... pieces. If you'll search his posts you're likely to find some. He's on Wood Central a lot, also.
 
I used to make a lot of smaller tools from Allen wrenches but now I use Drill Rod. Sometimes the hex shape can be a problem but it's easy to grind just about any cutting tip you want on a round rod. You can also get complete instructions on the annealing, hardening and tempering process with each type of drill rod. I use 0-1 because it's annealed and hardened with water. You can get it from lots of different metal suppliers really inexpensive.
 
Gary,
Sorry about the facetious answer. I made a tool similar to Mike's to do captive rings also. No picture, as much better examples than mine are available.
 
You must log in or register to reply here.
Back
Top