• January Turning Challenge: Thin-Stemmed Something! (click here for details)
  • Conversations are now Direct Messages (click here for details)
  • Congratulations to John Lucas for "Lost and Found" being selected as Turning of the Week for January 13, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Teknatool service

W

Wayne Spence

Joined
Jun 13, 2009
Messages
217
Likes
1
Location
Denver, Colorado
I had a problem with my insert for a new Supernova2 chuck on a 5 month 1624 . The insert would not seat against the headstock spindle. After going astray and trying it on a couple of other Novas on which it did work Tim Geist at Teknatool led me through the process while on a few phone calls. It was nothing more than a burr on the hole for the set screw. It worked on the other Novas just due to a difference in the machining, probably a few thousandths.

Thanks to Tim Geist for walking me through the analysis.
 
Tim has always been great to deal with. He has helped me out a number of times.
The last time was for headstock bearing that I thought I had going bad in my 3000.
Turned out the spindle pulley grub screw had loosened and it was rubbing.

Tim was great, offering advice and parts if I needed to order them.

---Mike Gould---
 
Tim is indeed an asset to Teknatool here in the states.
A real decent guy.
He helped me on the phone for 30 minutes & ended up with an order for about $2.00 worth of parts.

Felt bad I didn't need to fix more stuff on my dvr.
 
You must log in or register to reply here.
Back
Top