• January Turning Challenge: Thin-Stemmed Something! (click here for details)
  • Conversations are now Direct Messages (click here for details)
  • Congratulations to Scott Gordon for "Orb Ligneus" being selected as Turning of the Week for January 20, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Son of Burl Wolf

S

Steve Doerr

Joined
Jan 24, 2011
Messages
86
Likes
108
Location
Joplin, Missouri
About six months ago I did a turning that I gave to my brother which I called Burl Wolf (picture 1). Today I finished another turning from that same red oak burl. I have named this piece Son of Burl Wolf (picture 2). If you look closely, you can see a face at a slight tilt. It can be identified by the two eyes, a forehead, and a nose. The turning is 14 ¼†W x 10 ¼†H x 7/8†D and is 3/8†thick. I filled some of the voids with Inlacy turquoise. It has been dipped in a blend of oils and then Beall buffed. C & C welcomed.

Hope everyone has finished all of their Christmas projects and that you will have a very Merry Christmas.
Steve
 

Attachments

  • WT 1164-2.jpg
    WT 1164-2.jpg
    187.4 KB · Views: 76
  • WT1212.jpg
    WT1212.jpg
    57.3 KB · Views: 71
You must log in or register to reply here.
Back
Top