• Congratulations to Alex Bradley winner of the December 2024 Turning Challenge (click here for details)
  • Conversations are now Direct Messages (click here for details)
  • Congratulations to Gabriel Hoff for "Spalted Beech Round Bottom Box" being selected as Turning of the Week for January 6, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Small Vacuum Chuck

V

Vince Welch

Joined
Jul 28, 2004
Messages
107
Likes
2
Location
Smithfield, KY
Website
www.vinceswoodnwonders.com
I am rather new to vacuum chucking and I have only one vacuum chuck drum that I am using and it is 5 1/2 inches in size. I would like to have a small vacuum chuck that I could use with small lidded boxes. What do I need to do to create/build one of these? Is a small vacuum chuck a good idea for small applications like a lidded box? Any help would be great. VWNW
 
You can build a vacuum chuck just about any size you want but remember the smaller the size the less strength it has. I have one that is 3 1/2" for doing my small mirrors but you can pop the wood off with fairly light hand pressure even at 23/24 inches of mercury. I use bevel rubbing cuts and actually push on the bevel (instead of gliding on the bevel) to keep the wood in place. I would be leary of doing this on the lip of a bowl but since the mirrors sit pretty flat there isn't any real sideways torque unless you force the cut.
 
You must log in or register to reply here.
Back
Top