I was wondering if anyone has any experence that they may run/smack 😱 /or download into my brain. Any help appreacted.
-
Congratulations to Alex Bradley winner of the December 2024 Turning Challenge (click here for details) -
Conversations are now Direct Messages (click here for details) -
Congratulations to Gabriel Hoff for "Spalted Beech Round Bottom Box" being selected as Turning of the Week for January 6, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Segmented Turning
- Thread starter Kyle
- Start date
I have a web site devoted to segmented turning. It gives basic instructions & plans. Start small & work up from there. For good work the fit must be exact. All surfaces must be true and square. GT
www.georgetroygraphics.com
www.georgetroygraphics.com
Georgetroy gives you a lot of fantastic ideas with drawings.Kyle said:
Nearly all are orizontal segmented turning. You van get very nice vertical segmented effects, and you have somewhat less to glue together.
For a start I would recomend vertical segmented turning.
Enjoy it! 🙂
Malcolm Tibbetts' book on segmented turning is excellent as well and would be a good resource. "The Art of Segmented Woodturning; A step-by Step Guide".
Joe
Joe
ok thanks
I smacked my head into my tv (which is hooked into my computer) and im trying to do it....right....now
I smacked my head into my tv (which is hooked into my computer) and im trying to do it....right....now
john lucas
AAW Forum Expert
Kyle I'll second Malcolm Tibbits book. I own most of the segmented books on the market and his is the best I've read. It covers a lot of different techniques and does it well. You can get them off Amazon. com pretty easily.
Segmented web ring
Have you seen the web ring dedicated to segmented turning. http://q.webring.com/hub?ring=segmentedwoodtur
You could get an overdose there.
Have you seen the web ring dedicated to segmented turning. http://q.webring.com/hub?ring=segmentedwoodtur
You could get an overdose there.
Simple segmented fruit bowl for Kyle
Ok here you go. Faceplate: screw wood disc to it for glue block. Glue 6" solid disc for segmented base, I would use walnut or maple, they part easy. Next size 12 pc segmented ring 7", then, 8", then 9" and last ring 10". Your flat boards should be at least 1 1/2" wide. Follow the basic instructions on my web site. www.georgetroygraphics. com.
I posted 2 photos of a simple fruit bowl in the gallery of georgetroy.
Ok here you go. Faceplate: screw wood disc to it for glue block. Glue 6" solid disc for segmented base, I would use walnut or maple, they part easy. Next size 12 pc segmented ring 7", then, 8", then 9" and last ring 10". Your flat boards should be at least 1 1/2" wide. Follow the basic instructions on my web site. www.georgetroygraphics. com.
I posted 2 photos of a simple fruit bowl in the gallery of georgetroy.