Greetings, I have a number of green turned tanoak bowls that I've finished with a sealer coat of 2 lb. shellac padded on topped with 3 light coats of Liberon oil finish also padded on. I would appreciate any suggestions as to how I could get a nice satin sheen finish on these non-food bowls. Thanks in advance, Michael
-
January Turning Challenge: Thin-Stemmed Something! (click here for details) -
Conversations are now Direct Messages (click here for details) -
Congratulations to Scott Gordon for "Orb Ligneus" being selected as Turning of the Week for January 20, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Satin Sheen
- Thread starter MICHAEL GOLD
- Start date
- Joined
- Jan 27, 2005
- Messages
- 13,040
- Likes
- 5,482
- Location
- Dalworthington Gardens, TX
- Website
- pbase.com
Liberon Finishing Oil is meant to be applied to bare wood, allowed to soak in for about ten minutes, and then the surface wiped dry with a clean cotton cloth. You should allow at least five hours between applications if you want additional gloss. One application will give you a matte finish while a second application will give a satin sheen and a t,hired application will produce a soft gloss. Oil finishes should never be applied over a film finish such as shellac, varnish, or lacquer as they will prevent the oil from penetrating into the wood.
Steve Worcester
Admin Emeritus
The green part is the tricky part. Any film finish applied to wet wood isn't going to work well.
I would need more info about the end product to comment more
I would need more info about the end product to comment more
These Tanoak bowls were turned green, then dried prior to finishing. My satin sheen solution:.. Light Beale tripoli buff of the Liberon oil finish....Then if customer wants a lower sheen...liberon 0000 steel wool or 3m synthetic steel wool rub.
Michael
Michael
Steve Worcester
Admin Emeritus
Are you using the sealer solution after drying? Are you re-turning to round or sanding or anything after green turning and drying?
- Joined
- Jan 27, 2005
- Messages
- 13,040
- Likes
- 5,482
- Location
- Dalworthington Gardens, TX
- Website
- pbase.com
Here is what he did: http://www.aawforum.org/vbforum/showthread.php?11007-maximum-temperature-on-drying-rack
They were turned to completion in a single go and probably just about dry before microwaving.
Steve,
On totally dry bowls; 1 thin coat 2 lb. cut blonde shellac padded on as a sealer...next day light rub w/ gray synthetic steel wool. The reason I turn my bowls green (aside from not being in love with dust) is that I want the controlled asymmetry of the shape & especially the tactile grain undulations which are non-existent in dry turning & dry sanding...So no re-turning to round, or any significant sanding except w/ synthetic steel wool.
Just my preference. Michael