I'm looking for a set of plans for a turned egg box. I think I've seen one somewhere, but can't remember where. I've tried google and come up empty. This is something I would like to demonstrate for our club. Thanks, Jim Bob
-
January Turning Challenge: Thin-Stemmed Something! (click here for details) -
Conversations are now Direct Messages (click here for details) -
Congratulations to John Lucas for "Lost and Found" being selected as Turning of the Week for January 13, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
plans for a egg box
- Thread starter jbburgoon
- Start date
john lucas
AAW Forum Expert
Is it just a box shaped like an egg, or is it a box to hold an egg?
You can get free ones a Publix...sorry :cool2: If you are talking about a box shaped like an egg use the instructions for a lidded box and just change the shape if like John asked a box to hold eggs..well that would take some off center turning, but is very do-able, but I don't think you will find plans.
Last edited:
I f you need a box to hold eggs , then buy a section of egg foam for a pattern
- Joined
- Jul 15, 2008
- Messages
- 384
- Likes
- 8
The journal ran an article in 2009 (or 2010?) on a turned egg-shaped box that additionally had piercing. You can go to the online journals in the Members Area and look up the article.
The February issue will carry an article on a palm seedpod shaped box, the shape of which could easily be modified to an egg shape. This article is by Neil Scobie from Australia.
Betty Scarpino, editor, AW
The February issue will carry an article on a palm seedpod shaped box, the shape of which could easily be modified to an egg shape. This article is by Neil Scobie from Australia.
Betty Scarpino, editor, AW