- Joined
- Nov 5, 2008
- Messages
- 26
- Likes
- 31
Does anyone here know how I can adjust the VFD on my Powermatic 3520 b so that I can get it to run about 20 to 25 RPM's ??
It's set from the factory at 50 RPM.
I know that the older models 3520 & 3520 a models could be turned all the way down to zero RPM"s.
I would really like to get down to the 20 to 25 Rpm range for finishing, not for actual turning.
Thanks Joe
It's set from the factory at 50 RPM.
I know that the older models 3520 & 3520 a models could be turned all the way down to zero RPM"s.
I would really like to get down to the 20 to 25 Rpm range for finishing, not for actual turning.
Thanks Joe