• Congratulations to Alex Bradley winner of the December 2024 Turning Challenge (click here for details)
  • Conversations are now Direct Messages (click here for details)
  • Congratulations to Gabriel Hoff for "Spalted Beech Round Bottom Box" being selected as Turning of the Week for January 6, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

older timber

Joined
Feb 10, 2006
Messages
4
Likes
0
I have two or so trees that have been down for about three years when I cut them for blanks, do I need to treat the ends like you do for green wood .
and are they ok to turn. thanks
 
Yes, The rule of thumb is wood will dry one inch per year. So when you cut up an old log sould be considered green. That said when you rough it out it won't sling water like a fresh cut tree. One of my mentors says treat all wood as wet wood. He has less failures and warpage than I do.
Frank
 
If the bark was firm, you could still have a waterlogged tree. Inch per year means nothing. If you're going to cut 'em into short pieces, protect the ends from damage by coatings or coverings. Best thing to do is to rough and begin the drying process as a turning, second best would be to leave them in the log and lop off chunks as you're able for instant turning. If you cut them into short pieces, you've got the method least likely to produce a high percentage of good turnings - unless you keep them frozen or well-protected and turn a mess of roughs quickly.

Remember, it's winter rules drying. The cold outside air will be very dry when warmed to human comfort levels, so give extra protection to keep the descent slow.
 
Back
Top