-
Congratulations to Alex Bradley winner of the December 2024 Turning Challenge (click here for details) -
Conversations are now Direct Messages (click here for details) -
Congratulations to Gabriel Hoff for "Spalted Beech Round Bottom Box" being selected as Turning of the Week for January 6, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Mini Lathe bearing info
- Thread starter mikeplumb
- Start date
Go to the Mfg. web site.
CA
CA
If you are able to get the inside diameter, outside diameter and the overall width of the bearing to be replaced most any bearing store can get you an excellent replacement. Hope this helps,
Jim :cool2:
Jim :cool2:
Bearings
Other than ordering from the lathe manufacturer, if you are able to walk into a bearing dealer with the old bearings and the spindle, they can get about any size bearing you need (and better quality than OEM). Try these folks >> http://www.timken.com/industries/industrial/faq.asp
Other than ordering from the lathe manufacturer, if you are able to walk into a bearing dealer with the old bearings and the spindle, they can get about any size bearing you need (and better quality than OEM). Try these folks >> http://www.timken.com/industries/industrial/faq.asp