I am concidering turning thin lamp shades, but I don't know how to hold it in the chuck with the holes in both ends. What orientation should the grain be.
Wyatt
Wyatt
-
January Turning Challenge: Thin-Stemmed Something! (click here for details) -
Conversations are now Direct Messages (click here for details) -
Congratulations to Gabriel Hoff for "Spalted Beech Round Bottom Box" being selected as Turning of the Week for January 6, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
lamp shades
- Thread starter Wyatt Holm
- Start date
- Joined
- Nov 25, 2006
- Messages
- 215
- Likes
- 0
I have done several. I turned an ultra thin bowl in a cone shape holding it in a oneway chuck at the top end. No moves. I turned a bead at the top, about 1/2" wide, 1/4" thick, for the supports that go down to the harp. I cut the supports out of a wal-mart lamp.
I slowly dried it after soaking it in dish washing detergent and water over night.
I slowly dried it after soaking it in dish washing detergent and water over night.