• January Turning Challenge: Thin-Stemmed Something! (click here for details)
  • Conversations are now Direct Messages (click here for details)
  • Congratulations to Gabriel Hoff for "Spalted Beech Round Bottom Box" being selected as Turning of the Week for January 6, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

inside out turnings

Fed Holder had an article on them a long time ago. They are rather simple to do. Four square pieces of wood. Must be square and equal in size. glue the ends with ca about 1/4" no more. Turn what will be the inside shape. Mark the ends so you can keep them aligned. Cut off or split the glued ends. Turn each piece 180 degrees. Glue the surfaces in total back again. Then put back on lathe and turn to final shape. There is an on line pictured source but I can't locate the url just yet...Darryl
 
Send an e-mail to my home and I can send what info I have. johnclucas@charter.net Unfortunately I have collected a lot of info that I only have as hard copies but I do have some handouts that I have put together that should give you some idea of what i do.
I will be doing a demo in Athens Ga at the end of April on Inside out turning.
 
CTutor said:
Fed Holder had an article on them a long time ago. They are rather simple to do. Four square pieces of wood. Must be square and equal in size. glue the ends with ca about 1/4" no more. Turn what will be the inside shape. Mark the ends so you can keep them aligned. Cut off or split the glued ends. Turn each piece 180 degrees. Glue the surfaces in total back again. Then put back on lathe and turn to final shape. There is an on line pictured source but I can't locate the url just yet...Darryl
Click to expand...



Here is one source.http://www.almather.com
 
You must log in or register to reply here.
Back
Top