• January Turning Challenge: Thin-Stemmed Something! (click here for details)
  • Conversations are now Direct Messages (click here for details)
  • Congratulations to Gabriel Hoff for "Spalted Beech Round Bottom Box" being selected as Turning of the Week for January 6, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Glaser Screw Chuck (33mm x 3.5)

F

Frank F

Joined
Oct 31, 2006
Messages
99
Likes
8
Location
Massachusetts
I just received my Glaser screw chuck from Highland Hardware for my Oneway 2436 only to find that the chuck does not screw completely onto the spindle. I called Highland Hardware and they were great as usual. They mounted another chuck on their Oneway and found the same problem. All their Glaser 33 x 3.5 chucks are the same. The chucks seem to be improperly machined.

Here are the facts (See attached photos):

  • The length of the threaded portion of the spindle is about 7/8"
  • The threads on the chuck start about 3/8" into the chuck (from the edge)
  • The chuck can't turn past the ring on the spindle at the end of the spindle threads. This means the chuck is only threaded about 1/2" onto the spindle.

Has anyone else run into this problem? Were the original Glaser chucks machined this way?

Is it an issue? I'd like to use all the spindle threads to hold the chuck. Certainly more than 1/2". Your opinions are welcome.

Frank
 

Attachments

  • P1010136.JPG
    P1010136.JPG
    478.2 KB · Views: 45
  • P1010156.JPG
    P1010156.JPG
    56.7 KB · Views: 36
  • P1010137.JPG
    P1010137.JPG
    56.8 KB · Views: 40
  • P1010154.JPG
    P1010154.JPG
    59.6 KB · Views: 69
Last edited:
What matters is not the number of threads that would hold the chuck. It is the perfect match of the back of the fully seated chuck against the collar of the spindle gives the accuracy. IMO, the chuck is not acceptable for Oneway spindle.
 
Hi Frank,

I also have the 2436 Oneway and an older (Jerry Glaser made) screw chuck. It threads on perfectly. I would say you have a lemon.

It should screw on all the way on. Like Gordon said, that is what gives it its accuracy.

I hope they find you a good one. It is a terrific addition to my turning kit.

Best wishes,

Dave
 
This chuck is definitely not machined properly - too bad it's not just one clunker, but the whole batch; they were asleep at CET for both the machining and QC of the released product. I'm sure Highland will make good on your purchase (excellent customer service in my experience), but I'd not hold my breath that CET will be making any more Glaser tools any time soon. Unfortunately for Jerry and his legacy, CET Tools seems to be full of promises but no product.... a dead end for Glaser tools, emphasis on the word 'dead'.

Very unfortunate for all of us that Mr. Glaser chose to affiliate with this company.

Rob Wallace
 
Glaser Screw Chuck

I want all accessories (faceplates, chucks, etc.) mounted on the spindle of my Oneway 2436 to seat solidly against the spindle collar. It's the only way to ensure alignment of the accessory with the centerline of the lathe.

The Glaser screw chuck that I ordered from Highland Woodworking would not seat against the collar. I returned the chuck and they refunded my money. No problem. No hassle. - John
 
Update

I faxed and emailed the photos to CET. I just spoke with Paulo Marin, CET Founder and Chief Executive.

Mr. Marin agreed that their CNC machine improperly cut the relief and asked me send the chuck back to CET for a replacement. I told him that Highland Hardware apparently has a batch of improperly machined chucks. He said he'd call them.

I'll keep you posted on how this works out.

Frank
 
Last edited:
Update

I decided to return the chuck to Highland Hardware. All things considered, I preferred to deal with one company, Highland Hardware. I was afraid I'd be out the money and waiting for a chuck for who knows how long. At least I'll get my money back.

There is an interesting thread at Wood Central on the availability of Glaser tools and chucks from earlier this year:

http://www.woodcentral.com/cgi-bin/messages3.pl?index

I wish Mr. Marin good luck with his new aerospace contracts and hope that he can reliably provide Glaser tools and chucks in the future.

Frank
 
You must log in or register to reply here.
Back
Top