Wanted to know if anyone out there knows how chase threads or where I can gather more info on the subject. I must be looking in the wrong place because I can't seem to find much on the subject. I do know there are special tools so where to but them would also be helpful.
-
Congratulations to Alex Bradley winner of the December 2024 Turning Challenge (click here for details) -
Conversations are now Direct Messages (click here for details) -
Congratulations to Gabriel Hoff for "Spalted Beech Round Bottom Box" being selected as Turning of the Week for January 6, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Chasing Threads
- Thread starter Chuck Wood
- Start date
Batty
Allan Batty's video and accompanying booklet was a big help, for me. Although you can make your own tools, I chose to purchase mine from Craft Supply, USA.
Allan Batty's video and accompanying booklet was a big help, for me. Although you can make your own tools, I chose to purchase mine from Craft Supply, USA.
if you can get into an Allan Batty class in Utah, do so -- he's a wealth of info. also, he'll show you how to modify your purchased chasers so they actually work!
his video is great and has some additional documentation that covers the chaser conversion. it's a good place to start
not only do you need the chasers, but also the arm rest
his video is great and has some additional documentation that covers the chaser conversion. it's a good place to start
not only do you need the chasers, but also the arm rest
Last edited:
Fred Holder also has a tutorial published on chasing threads. His website is www.fholder.com; he can be reached at woodturner@fholder.com.
Joe
Joe
john lucas
AAW Forum Expert
I was also going to recommend Fred Holder's book. It is excellent. If you'r rather just cut them instead of hand chasing look at the Thread cutting tool from www.bestwoodtool.com
Thanks to all for the replies. You've given me a good place to start!!
- Joined
- Apr 27, 2004
- Messages
- 9,069
- Likes
- 5,608
- Location
- Lakeland, Florida
- Website
- www.hockenberywoodturning.com
where are you located?
Thanks again Dudes...
:cool2: "Hock" and all. Thanks again! Added my location for "Hock" in UPR RH of my profile. That one guy wanting advice on the new lathe purchase stirred up some stuff.....fun. Later.
Wood C.
:cool2: "Hock" and all. Thanks again! Added my location for "Hock" in UPR RH of my profile. That one guy wanting advice on the new lathe purchase stirred up some stuff.....fun. Later.
Wood C.
F.Y.I. I just noticed that www.bestwoodtool.com is no more! It just shows links to similar sites. But the Domain is for sale.
JImQ
JImQ
john lucas
AAW Forum Expert
Jim It's www.Bestwoodtools.com you left off the "s" Vic said they are in the process of updating their website with some new things. one of them is a really nice 1/2" keyless chuck. I don't remember the price but it is an excellent by. It takes drill bits from 1/32 to 1/2" and has a #2 morse taper. John
I didn't leave off the "S", you did.😀 OOPS! I just clicked on what you put in your earlier post.
JimQ
Just looked at BestwoodTools and decided that for now I don't need to turn threads!
JimQ
JimQ
Just looked at BestwoodTools and decided that for now I don't need to turn threads!
JimQ
Last edited:
john lucas
AAW Forum Expert
There are ways to build a threading jig. fred holder has one in his book but I have seen others somewhere. I'll have to do a search and see if I can find a sketch.
john lucas
AAW Forum Expert
Mike Darlow's book "Woodturning Techniques" has an excellent chapter on threading including a couple of ways to make your own threading jig.