I bought some sanding sponges at a close out store eight in a pack. The grit wasn't marked my guess was 220 or 320. Always willing to try something new I bought a pack. They work great between coats conforming to the shape of the bowls. These aren't like drywall sponges these are a lot more flexible with grit on two sides about 3x5 and 1/2 inch thick. I went back and bought all they had. I'm on my last pack and started searching finally finding some after 20 some pages. Uneeda Enterprizes has them in boxes of 250. Major Grady from northern abrasives happened to be snowed in when I called him. We had a long conversation. He agreed to split some up. I bought 250 sponges from him 25 each of the 10 grits. I'm hoping one of the turning stores we all buy supplies from will carry these in smaller amounts than the 250 count box.
-
January Turning Challenge: Thin-Stemmed Something! (click here for details) -
Conversations are now Direct Messages (click here for details) -
Congratulations to Scott Gordon for "Orb Ligneus" being selected as Turning of the Week for January 20, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Anyone use sanding sponges
- Thread starter John Fulkert
- Start date
- Joined
- Jan 27, 2005
- Messages
- 13,040
- Likes
- 5,483
- Location
- Dalworthington Gardens, TX
- Website
- pbase.com
Hi, John, and welcome to the AAW forum. I haven't tried sanding sponges on woodturnings, but I use them a lot on trimwork like crown molding and baseboard. Thanks for the tip.
Welcome to the forum! I bought some at Harbor Freight and they seem to do good. Haven't tried them on turnings. Not sure of the grit as I tossed the packaging. I could look them up on their website.