wolverine

I need this jig atachment it for grinding a 3/8 spindle gouge and 1/2 bowl gouge. I’m about to buy the vari-grind # 1 and there are 2 sizes, one small that is for 1/8 to 5/8 and a larger one that goes from 1/2 to 1 1/8. So it looks obviously that I need the small one, but when looking for...

Wasn't in the mood to turn yesterday but set up the grinder and the Wolverine setup. Went through all my tools and sharpened them. Today I did some turning for practice. Makes a big difference! I turned some small tree limbs and some square pieces with the roughing gouge. I decided to try the...

A recent issue of the AAW magazine had a great article about the rise of the Irish grind. I checked my bowl gouge and it has the parabolic shape shaft. The U-shaped shaft was not good for the Irish grind. Here- can it be ground on a Wolverine setup with the Vari-grind 2 jig? Or is it done done...

Treated myself to an early birthday present. Had a birthday card from Woodcraft for 10% off. Bought some pen kits for some Christmas orders already. I have the Wolverine jig already. I saw the original Vari Grind Jig and put it in my basket. Now to continue on another thread, what is the best...

I tried to open this can of worms in an earlier thread, and nobody took the bait. But @john lucas posted the following in the Newbie forum, and I didn't want to hijack that thread, so let's see what happens here. John's experience: "What I find is the angle of the arm on the Wolverine affects...

I discovered two things today about the Wolverine grinding set-up that, despite all my reading and video watching, evaded notice. So, am posting this for future searches using "Wolverine" as key word/tag. The conflicting information about extending the tool 2" or 1-3/4" from the Verigrind...