• We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks!
  • Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

winged

  1. Mesquite Winged Natural Edged Bowl

    Mesquite Winged Natural Edged Bowl

    Winged natural-edged bowl turned from green mesquite and finished with lacquer. Size is approximately 15 inches from tip to tip. Donated to local Tarrant Area Food Bank for upcoming Empty Bowls Project.
  2. Gave it a Whirl side

    Gave it a Whirl side

    This piece was turned from Sycamore and Blackwood, dyed with 4 colors using the airbrush, sealed with 4 coats of Waterlox and buffed with the buffing system. The wings were turned to 1/8 and the size is 11 x 7 x 5 inches. I am generally not one to get out the auto body saw and cut away...
  3. Gave it a Whirl

    Gave it a Whirl

    This piece was turned from Sycamore and Blackwood, dyed with 4 colors using the airbrush, sealed with 4 coats of Waterlox and buffed with the buffing system. The wings were turned to 1/8 and the size is 11 x 7 x 5 inches. I am generally not one to get out the auto body saw and cut away...
  4. Feathers and Kauri

    Feathers and Kauri

    Ancient kauri 550mm square ,hand carved ,stained and airbrushed .Jacques Vesery style feathers . Lacquer finish to the underside and bowl timberly@xtra.co.nz
  5. small_winged_basket_

    small_winged_basket_

  6. Bi-winged bowl

    Bi-winged bowl

    Birdseye maple, bloodwood and tulipwood glued as an oblong block then turned without chopping fingers (can happen, does happen oooch) This one is just over 7 inches by 2 and 1/4 wide and 2 and 3/4 high. 1/8 thin all over. Comments as with all my turnings always welcome
  7. Winged Bowl

    Winged Bowl

    A winged bowl turned from a Norway maple crotch section. I picked up the techniques to turn this type of piece during a Bill Grumbine class that I attended in May. Bowl Width at rim: 5 1/2" Bowl Height: 2 5/8" Bowl Base: 1 15/16" diameter Crotch Wing Dimensions: 8 5/8&quot...
  8. Box Elder Burl Natural Edge Winged Bowl

    Box Elder Burl Natural Edge Winged Bowl

    Kind of a funky lookin bowl. Its 10" wide on the wings with a 5" bowl. I turned it green to the final shape and sanded to 1200 grit. I then soaked it in DNA so it wouldn't crack and took it out to dry and warp, it didn't crack any but I was hoping it would of warped a little more. Some...
Back
Top