• November Turning Challenge: Puahala Calabash! (click here for details)
  • Congratulations to Ted Pelfrey for "Forest Floor" being selected as Turning of the Week for November 4, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

void filling

  1. Kevin Weir

    Stitching Up A Bowl Crack

    The bark inclusions on these 2 cherry bowls fell out during the drying process. I chose not to fill the void with epoxy and wanted to try something different. So I drilled small holes along the sides and am planning on using a thin braided cord to stitch them up. There are several stitch...
  2. D

    spalted maple 10 inch bowl

    I am working on a 10 inch spalted maple bowl 10 X 4. I have tons of voids. I have read about filling the voids with various things and that may be what I have to go with. However, I am wondering about surface sanding to 600 and then applying CA for 3 or 4 coats and then polishing it with CA...
Back
Top