• November Turning Challenge: Puahala Calabash! (click here for details)
  • Sign up for the AAW Forum Pre-Holiday Swap by Monday, November 4th (click here for details)
  • Congratulations to Ted Pelfrey for "Forest Floor" being selected as Turning of the Week for November 4, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

mandrel

  1. N

    11/16 spindle 14 TPI

    Hello, I bought a cheap wood lathe to get started on some projects I have always wanted to do. It is a 14X40 lathe and I have turned bats, bowls, and turkey calls on it so far. I wanted to try my hand at pens next. My spindle seems to be a step down rather than a Morse taper. Pictures attached...
  2. John Torchick

    Chuck won't stay put!

    I'm in the process of building a custom fly rod for my grandson. A rodbuilding site I frequent had a photo of a bamboo rod with a bamboo winding check, that is, the part that makes the transition from the cork grip to the rod blank itself. I decided to give it a try with a piece of caragana...
  3. John Torchick

    Offcenter holes

    I'll post here as I still consider myself new to the craft. I have a HF lathe, #34706. The headstock and tailstock line up OK. I turn cork for custom fishing rods. I use a piece of 1/4 in .X 12 brass tube for a mandrel. I turned a foregrip today and noticed that the hole was a bit off...
Back
Top