bubinga

5-3/4" x 1-3/4". Pierced with a Dremel and engraving bits. Finished with Seal-A-Cell. The bottom was buffified with white diamond and wax. The entire bowl is one piece (no lid).

This wedding goblet is made from a laminated piece of Bubinga and Beech. It is 7" tall and 2" in diameter. The rings were made by a friend in silver as close copies to the white gold ones that my son and his fiance will be using on the day. The finish is sanding sealer and then...

I haven't posted anything here in a bit, so here ya go. This is my best piece so far IMHO. It's only my 2nd (succesful) HF. Finish is Deft Gloss Laquer, no wax yet. Measures 11" x 8" x 3/16, and the opening is 2.5" (all approx. I forgot to measure, will edit). Not really my...

Turned for Chris Wright for a Challenge and Trade at Woodturner's Resource. Made from a mystery burl and Bubinga, with a single Walnut cutaway spiral that started as a double twist. The vessel measures 8"x3", and the finial is 5.5"x2.5". The lid is also 5.5&quot...

Here is a box in some wonderful curly bubinga that I was gifted a while back. This box is 2 3/4" tall and 3" in diameter.

This box is 2" tall and 2 1/2" in diameter. The curl spirals around the box.

Bubinga Bowl 9" dia with burnt rim EXCUSE THE BAD PHOTO still working on that. Oil finish sand to 1200 Bubinga turns very nice and takes a finish well too. Thanks for looking comments welcome Bernie

Figured Bubinga - 7" sq x 3" tall. Jamie Donaldson's enspired this shape. Many Tung Oil coats and Wax Buffed.

Some time ago I posted some preliminary pictures in another forum of a 16" bubinga platter I was working on that included some carving to mask a defect. A could weeks ago I finally got it completed and "finished". Given the shop renovation in progress, I ended up top coating it...