• November Turning Challenge: Puahala Calabash! (click here for details)
  • Sign up for the AAW Forum Pre-Holiday Swap by Monday, November 4th (click here for details)
  • Congratulations to Ted Pelfrey for "Forest Floor" being selected as Turning of the Week for November 4, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Copper Teapot
Mike Gibson

Copper Teapot

I made this Teapot from Pear about six months ago and treated it with a copper metal effects oxidizing paint then treated it with an aging solution to give that green/blue look tint. Try as l may l just could not get it right, either too much or too little. After several attempts l read that if left alone in time it would naturally achieve the same results. So I placed it in my screened in porch and forgot about until this week. I did not notice the spider under the handle until l brought the photos up on the computer. Guess l need to clean it up now and take another photo so you can see how it turned out, and fire the cleaner.
Pretty close Bill. This weekend l was sorting out boxes to take some of my work to the GA Fair and l came across the box that the metal paints had come in and found directions on how to use it which is totally different than on the bottles. Now l am going to have to make something and give it another go.
 
@Mike Gibson
Kirk DeHeer of Craft Supplies did a demo last year at SWAT on using the paints and I more or less followed his recipe on the couple pieces that I did. He said that he put the pieces in a damp cardboard box after spraying with the patination chemical to keep it from drying too fast, but he lives in Utah where things are much drier than in central Texas.
 
I like it with the Web. To bad that's so hard to create. I bought some of that web stuff they sell at Halloween but you can never get the orb weaver look.
 
Hey Mike, I apply the Patina right after the second coat of copper while it is wet. I sprayed one till it was dripping, it oxidized within an hour, it was too much that I don't see copper anymore. I did second piece with much less oxidizing solution, it gave me same effect you have and could not get it to oxidize anymore. First was in blue, second was in green. I need to try it again to see if blue vs green makes a difference.
 
I agree with John, I like the web. If it were me I would have taken credit for that and let no one be the wiser. Great looking pot as always.
 

Media information

Album
Michael Gibson
Added by
Mike Gibson
Date added
View count
2,790
Comment count
7
Rating
5.00 star(s) 2 ratings

Image metadata

Device
NIKON CORPORATION NIKON D5500
Aperture
ƒ/22
Focal length
75.0 mm
Exposure time
1.6 second(s)
ISO
100
Flash
Off, did not fire
Filename
Copper Teapot-1936.jpg
File size
215.3 KB
Date taken
Sun, 04 September 2016 2:58 PM
Dimensions
1024px x 923px

Share this media

Back
Top