Congratulations to Paul May for "Staircase Study #1" being selected as Turning of the Week for November 11, 2024
(click here for details)
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
This vessel is made from dyed Maple with an Ebony bottom and an Ebony and Brass top. The dye has been shaded darker toward the bottom. A three tree design has been pierced equally around the vessel. The vessel measures 9 inches by 6 inches. Any comments or suggestions are welcomed.
Hal, I used an airbrush to apply the dye while the piece was on the lathe. I used a darker shade of dye around the bottom and blended it in while the piece was turning. I used flat black lacquer inside. I've found from experience that if you use dye inside on a piece thin enough to pierce, the dye will go all the way through to the outside.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.