• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • April 2026 Turning Challenge: Salad Bowl! (click here for details)
  • Congratulations to David Bartell, People's Choice in the March 2026 Turning Challenge (click here for details)
  • Congratulations to Gianni Di Gregorio for "Simple Piercing" being selected as Turning of the Week for April 20, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
B

Chinese Elm HF Set

This set was turned from a 17 bowl blank intended for coring. The checking had already developed quite deeply, precluding coring bowls from it. The blank was cut into quadrants and a natural edge hollow form turned from each. The next picture will show the 4th HF. The thickness of each is about 3/16. Each turning was finished with 3 coats of Waterlox and buffed. The sizes going counter clockwise from the front are: 3 x 4, 4 x 4 and 5 x 4 .
Richard, thanks much. Turned these to save the wood from finding the fireplace. Much better end result I think. Thanks again.
Bill
 

Media information

Media category
Member Galleries
Added by
Bill Pottorf
Date added
View count
3,218
Comment count
2
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON CORPORATION NIKON D80
Aperture
ƒ/16
Focal length
50.0 mm
Exposure time
1.3 second(s)
ISO
125
Filename
Ike_NE_C_Elm_HF_Set.jpg
File size
54.1 KB
Date taken
Sun, 01 March 2009 5:40 PM
Dimensions
807px x 500px

Share this media

Back
Top