Hey folks. Just showing off one of my recent pieces, a piece of spalted Hickory, probably picknut but I'm not 100% on that--possibly mockernut. It was a blowdown in one of the turning club members' yards. Thanks Paul Pierce! This was at and partially below ground level; the roots were totally rotted away, which caused the wonderful green and red/purple colors. The wood was absolutely solid, and no punky spots in the bowl at all. These were turned green, and cored with the McNaughton center saver. I did use black CA glue on a couple small hairline cracks that formed as the pieces dried. I soaked them in DNA and dried them very slowly in a double layer paper bag for a few weeks, then sanded and varnished them with Antique Oil. They are all between 1/8 and 3/16" thick, with approx. 1/4"-3/8" thick bases depending on the size bowl, to balance them. The largest started out at 13.5", but moved a LOT, to about 12.75. The others are about 10" and 6" at their widest. Although quite thin, Hickory is surprisingly heavy even at this thickness, and very dry in the winter in my wood heated shop.
I'm new to photography; this was just a box and some tissue paper, and a daylight spectrum incandescent bulb. Next time I take pics I'll have to come up with better lighting. The glare spots drive me crazy!!
