• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to William Rogers for "Ambrosia Maple Platter" being selected as Turning of the Week for September 16, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
DUSK
Walnut # 478
Red Coolibah #472
"Suupu du Jour"
DUSK
Horse Chestnut Hollow Form Box
Textured Hollow Forms
Dyed ash hollow form
Craig Kassan

DUSK

Curly Walnut on Copper. 23" x 57 1/8" x 2 1/8"
The background is plywoos with textured paper and covered in copper using a cold metal spraying technique
Click to expand...
  • Like
Reactions: Matthew Kilareski, Dimitris Psilopatis, Russ Braun and 12 others
Michael Anderson
Nice, Craig! I love how the incredible grain is obvious left-right. A lot to be attracted to this piece (without considering the massive propeller this must have been while turning). Also, it was nice talking with you guys in Portland. Hope to see you in St Paul.
 
Nino G. Cocchiarella
Cool! I’ve wanted to experiment with similar effect on cabinet doors. Off centering a turned pattern. I’m not sure how you turned that, all at once or in segments but is cool!
 
Craig Kassan
Michael Anderson said:
Nice, Craig! I love how the incredible grain is obvious left-right. A lot to be attracted to this piece (without considering the massive propeller this must have been while turning). Also, it was nice talking with you guys in Portland. Hope to see you in St Paul.
Click to expand...
It was nice meeting and talking to you in Portland as well. The nice thing about turning in front of a giant propeller it that my floor stays clean, not to mention the breeze.
 
Craig Kassan
Nino G. Cocchiarella said:
Cool! I’ve wanted to experiment with similar effect on cabinet doors. Off centering a turned pattern. I’m not sure how you turned that, all at once or in segments but is cool!
Click to expand...
Nino, I have seen some cabinet doors with offset turning and they look great. I only have a 7ft faceplate on the lathe (LOL) so I turned the middle center first and then split the sculpture in 2, working each half separately
 

Media information

Category
Member Galleries
Added by
Craig Kassan
Date added
View count
635
Comment count
5
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
Dusk.jpg
File size
871.2 KB
Dimensions
1920px x 1280px

Share this media

Back
Top