• November Turning Challenge: Puahala Calabash! (click here for details)
  • Sign up for the AAW Forum Pre-Holiday Swap by Monday, November 4th (click here for details)
  • Congratulations to Ted Pelfrey for "Forest Floor" being selected as Turning of the Week for November 4, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Walnut crotch bowl
Open Palm
Walnut crotch bowl
Cathedral Staved Vase
Paul May

Walnut crotch bowl

Staved walnut crotch bowl with chatke viga and yellowheart accents. 5.5" diameter, 4.5" H
Click to expand...
  • Like
Reactions: Ed Davidson, Phil Hamel, Russ Braun and 12 others
Tom Gall
That walnut crotch figure on the staves is fantastic, and the veneer accent between the staves and the base is very attractive. However, the top ring/rim and its glue lines are bothersome to my eye. The number of segments should be equal to (or a multiple of) the number of staves. Just my 2¢. ;) Other than that small nitpick ... this is very well done, Paul.
 
Paul May
Tom Gall said:
That walnut crotch figure on the staves is fantastic, and the veneer accent between the staves and the base is very attractive. However, the top ring/rim and its glue lines are bothersome to my eye. The number of segments should be equal to (or a multiple of) the number of staves. Just my 2¢. ;) Other than that small nitpick ... this is very well done, Paul.
Click to expand...
Hi Tom...point taken. I thought of that when I was constructing the top but got a bit lazy and didn't want to do the math for 20 segments. I was delighted how it turned out though. Thanks for your nice comments!
 
Gabriel Hoff
Very beautiful! So you use a segmenting software like WoodturnerPro? That takes the math and calculations out and makes designing easy!
 
Steve Bonny
Paul the math ain't that hard! 360/20= segment angle. Pi x OD /20 = SEL. I'm just saying..... :)
Great looking bowl by the way!
 
Paul May
Gabriel Hoff said:
Very beautiful! So you use a segmenting software like WoodturnerPro? That takes the math and calculations out and makes designing easy!
Click to expand...
Hi Gabriel. I do use woodturner pro. That is how I got the correct angles for the 10 staves. I was just in a mood to get this one done is all.
 

Media information

Album
Staved vessels
Added by
Paul May
Date added
View count
863
Comment count
11
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON CORPORATION NIKON Z 6
Aperture
ƒ/4
Focal length
65.0 mm
Exposure time
1/13 second(s)
ISO
160
Filename
2023-11-19 17-50-11 (B,R7,S4) (1).jpg
File size
322.2 KB
Date taken
Sun, 19 November 2023 7:37 PM
Dimensions
1200px x 798px

Share this media

Back
Top