• Sign up for the AAW Forum Pre-Holiday Swap by Monday, November 4th (click here for details)
  • Congratulations to Nino G. Cocchiarella for "Woven Seat Stool" being selected as Turning of the Week for October 28, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Walnut hollow form
Michael Nathal

Walnut hollow form

The figure in this one is outstanding. 7 inches diameter by 3 inches tall. Finished with Osmo Polyx.
Michael - well done. An elegant form. Could I ask what is the opening size you used.
The opening at the top is a little less than 1/2 inch. Only a little hollowing was done through this. Most of the hollowing was through a hole in the bottom (now plugged), about 3/4 inch or so.
 
The opening at the top is a little less than 1/2 inch. Only a little hollowing was done through this. Most of the hollowing was through a hole in the bottom (now plugged), about 3/4 inch or so.
That explains what I thought I was seeing - a very small hole to support a 7” turning. I didn’t think that was practical. Thanks for addressing this. Beautiful still!
 

Media information

Category
Member Galleries
Added by
Michael Nathal
Date added
View count
834
Comment count
5
Rating
0.00 star(s) 0 ratings

Image metadata

Device
samsung SM-G991U
Aperture
ƒ/1.8
Focal length
5.4 mm
Exposure time
1/40 second(s)
ISO
640
Filename
20221107_081047.jpg
File size
3.5 MB
Date taken
Mon, 07 November 2022 8:10 AM
Dimensions
4032px x 3024px

Share this media

Back
Top