• November Turning Challenge: Puahala Calabash! (click here for details)
  • Congratulations to Paul May for "Staircase Study #1" being selected as Turning of the Week for November 11, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
2021 Ornaments
Butternut (interior view)
Butternut (practice bowl)
Honeycomb Bowl
2021 Ornaments
2021 Ornaments (a few more)
Holiday Exchange - 2021
Holiday Exchange - Upright Inside view
Tom Gall

2021 Ornaments

Groupings of my 2021 Ornaments.

Hollow globes (Maple or Cherry) with Holly icicles and/or hangers & caps. All are covered with crushed eggshells (except one). Approx. size ranges from 2¼ - 2½”ø x 4”- 6½ tall.

All are a little different (shape, design, colors) but use the same techniques. Some also have a carved texture. Airbrushed and/or colored with acrylic, metallic and interference paints.
Click to expand...
  • Like
Reactions: Martin Bauer, Roger Chandler, Russ Braun and 7 others
Tom Gall
Thanks, Ed & John. The challenging part is trying to come up with a different and new design/technique (for me) each year. As the years pile up (more than 20) this becomes more of a chore each year!
 
Tom Gall
Paul Lajoie said:
Tom would love to hear more about this eggshell technique!
Click to expand...
It is a PITA! :D .... especially on small curved surfaces like these globes. Flatter surfaces would probably be easier.
In short - I paint the surface with white gesso (so no natural wood shows through). Then apply white glue to small area and press/crush pieces of shell on the surface. Repeat until entire surface is covered (try not to overlap shell pieces). Works best if the membrane inside the egg is removed (another PITA!) prior to gluing. Then I remount on the lathe (between centers or vacuum is preferred) and sand the shells (forward & reverse) - this will break off any errant shells and smooth the surface a little. You might want to check for small areas with no shell(s) and fill that spot(s). Then you're ready for coloring - or whatever.
Hope this helps.
 
Paul Lajoie
Tom Gall said:
It is a PITA! :D .... especially on small curved surfaces like these globes. Flatter surfaces would probably be easier.
In short - I paint the surface with white gesso (so no natural wood shows through). Then apply white glue to small area and press/crush pieces of shell on the surface. Repeat until entire surface is covered (try not to overlap shell pieces). Works best if the membrane inside the egg is removed (another PITA!) prior to gluing. Then I remount on the lathe (between centers or vacuum is preferred) and sand the shells (forward & reverse) - this will break off any errant shells and smooth the surface a little. You might want to check for small areas with no shell(s) and fill that spot(s). Then you're ready for coloring - or whatever.
Hope this helps.
Click to expand...
Thanks Tom, basically the process I would have guessed. Thinking the removal of the membrane is the biggest pita. Unique idea! Thank you for sharing
 

Media information

Album
Tom Gall
Added by
Tom Gall
Date added
View count
1,591
Comment count
6
Rating
0.00 star(s) 0 ratings

Image metadata

Device
Panasonic DMC-LX3
Aperture
ƒ/2.1
Focal length
5.4 mm
Exposure time
1/80 second(s)
ISO
80
Flash
Off, did not fire
Filename
1 - Group 1 - P1060616.jpg
File size
394.6 KB
Date taken
Thu, 23 December 2021 11:07 PM
Dimensions
1800px x 1097px

Share this media

Back
Top