• March 2025 Turning Challenge: Identical Bowls or Plates! (click here for details)
  • Congratulations to Michael Nathal for "Ash Ring" being selected as Turning of the Week for March 17, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Gabriel Hoff

Afzelia Burl Capsule Box

Back to the capsule style on this one, it is turned from a very rare piece of Afzelia Burl (Afzelia zylocarpa). This wood, also called Makamong Burl is from Southeast Asia and has a lot of character, swirly grain, and an nice warm orange color. It is also dense, durable, and resistant to rot. Turned in the Ray Key style capsule it is hollowed and finished with abrasive wax then melamine lacquer. Size is 2 1/8" tall x 1 5/8" diameter. These rare woods are really unique but can be hard to make myself turn them because the wood is so rare and irreplaceable!
An additional view....

gB8dVzV.jpeg
 
Looks great Gabriel! :)

You are the AAW forum expert for boxes!

Now that you've been doing this for quite a while, do you find that the top and bottom don't mate as well as the newly finished product over time?

I did a few boxes maybe 25 years ago, and this was a problem for me.

It was also a problem for me with the laminated bowls I made. Many of those were problematic because different woods change shape differently over extended periods of time......but, that is entirely different than what you are doing.

=o=
 
Looks great Gabriel! :)

You are the AAW forum expert for boxes!

Now that you've been doing this for quite a while, do you find that the top and bottom don't mate as well as the newly finished product over time?

I did a few boxes maybe 25 years ago, and this was a problem for me.

It was also a problem for me with the laminated bowls I made. Many of those were problematic because different woods change shape differently over extended periods of time......but, that is entirely different than what you are doing.

=o=
Thank you Odie! That is a nice compliment from you.

As for the lid and base not mating over time, I have not found that yet with most of my pieces, even going back to work from 2-3 years ago. But, I will say that the wood needs to be dry.

I recently turned some Black and White Ebony, not green but slightly moist, and it definitely changed. The lid loosened up quite a bit and went out of round ever so slightly, causing a different fit then when it came off the lathe.

I tend to think that since I use a super thin parting tool to separate the lid and base it creates a very small "break" in the original piece, therefore if the piece decides to change, both the lid and base will move together.

Also not using two different blanks, one for the lid and one for the base really helps in reducing the movement.

We will see as I make more, but if any lid tightens up I can remount the base in a jam chuck and ever so slightly reduce the tenon size to get it back to the original fit!
 

Media information

Category
Member Galleries
Added by
Gabriel Hoff
Date added
View count
148
Comment count
3
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX P610
Aperture
ƒ/4.5
Focal length
12.5 mm
Exposure time
1/80 second(s)
ISO
100
Flash
Off, did not fire
Filename
FSCN2974.JPG
File size
260.5 KB
Date taken
Thu, 20 March 2025 11:03 AM
Dimensions
1920px x 1440px

Share this media

Back
Top