• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to David Bartell for "Critter Serioes #3" being selected as Turning of the Week for September 23, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
2012-05-11_020_480x640_
G

2012-05-11_020_480x640_

Russian Olive that has been blasted, finished with Danish Oil. Turned aluminum drilled holes in the piece below the cup (has a 1/4 inch hole to accept the tennon from the acrylic) and the piece on the foot has a tennon to go into the Olive foot with a 1/4 inch hole to accept the tennon from the acrylic piece. The piece is 10 inches tall and 3 1/2 inches wide The bowl is 3/16 inch wall thickness.

Media information

Category
Member Galleries
Added by
gary rock
Date added
View count
2,005
Comment count
2
Rating
0.00 star(s) 0 ratings

Image metadata

Device
Canon Canon PowerShot SX30 IS
Aperture
ƒ/5
Focal length
44.7 mm
Exposure time
1/13 second(s)
ISO
800
Flash
Off, did not fire
Filename
2012-05-11_020_480x640_.jpg
File size
156.4 KB
Date taken
Fri, 11 May 2012 6:39 PM
Dimensions
480px x 640px

Share this media

Back
Top