1. Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Wolverine Jig

Discussion in 'Getting Started' started by John Hyde, Jan 16, 2020.

  1. John Hyde

    John Hyde

    Jan 8, 2020
    Location (City & State):
    Anyone have luck using this jig with a 6” grinder? Or is meant to be used with an 8”? I understand the grind angle will be slightly different, just wondering if it will still work pretty well.

    Thanks in advance.
  2. Timothy Allen

    Timothy Allen

    Sep 11, 2019
    Location (City & State):
    NH and ME
    I've been using the Wolverine with a 6" grinder, it works fine. Set it up according to the directions, with the axis of the grinder 6-1/4 to 6-1/2 inches above the surface to which the Oneway bases are mounted. As to the angles, set them according to your tool bevels. The tools won't know that they are being ground on a 6" wheel as opposed to an 8" one (although the "hollow" of the grind will be more pronounced).
    Timothy White likes this.
  3. Roger Wiegand

    Roger Wiegand

    Nov 27, 2018
    Location (City & State):
    Wayland, MA
    Home Page:
    Used it for years on a 6" grinder. 8" grinders were a rarity back when I bough it!

    I did have to saw off various pieces of the built-in tool rest on my Craftsman grinder so they weren't in the way of swinging the chisel.
  4. Tom Gall

    Tom Gall

    Feb 20, 2013
    Location (City & State):
    Hillsborough, NJ
    I've used the Wolverine jig on my high-speed 7" grinder for 22 years. Bought my first 8" CBN wheel in 2013 and added a second CBN in 2015. Then added an 8" slow-speed Rikon in 2018. The Wolverine worked in all instances.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice